trex stair railing installation instructions

Includes 1 bracket pack not pictured This kit includes the infill components needed to cut down a Trex Signature Mesh Rail kit. Trex Signature Aluminum Rail and Round Baluster Kit in Bronze. Trex is the worlds 1 composite fencing brand and the inventor of wood-alternative composite decking and fencing. 2 Design Criteria 21 Building codesstandardsproject specifications. Holy Cow Black Aluminum Posts With Trex Decking Top Rail Would You Go With A Composite Or Wood D Cable Railing Cable Railing Systems House Designs Exterior For full span installations the mesh will not need to be cut with the exception of 6 x. As strong and sturdy as its namesake decking Transcend puts every color combination within reach. Check the Trex Installation Guide for a list of approved fasteners.Available in Horizontal or Stair 6 or 8 panels.

Use a color-matched composite fastener to attach the deck board. Pre-drill the decking 1” in from the end of the board and 1” in from the edge of the board. Place the first deck board on top of the stringers flush with each side stringer and tight to the spacers on the deck frame. Install the treads first in this instance. 10 ½” would be the length of the run on the stringer. Two deck boards 5 ½” + 5 ½” + ¼” for spacing = 11 ¼”. The riser material would be placed on the front and the back of the tread so it would not be deducted. In the other case where the risers were to be installed first, the measurement of the riser would not be removed from the equation. 10 ½” – ½” for the riser fascia = 10” as was determined earlier. In this case, the two deck boards, 5 ½” + 5 ½” + ¼” for spacing = 11 ¼”. If the dimensions of the treads were designed by taking away all the measurements of the nosing and riser thickness, then the treads will go on first. The stair stringer dimensions will dictate whether the treads get put on the stringers first or the risers get put on first. The decking on the treads need to be spaced ¼” apart in order to allow for expansion and contraction as well as to allow debris to easily pass through. Measure away from the deck frame 33 ¾” and mark that distance on the 2x4 clamped to the top of the frame. Three treads at 11 ¼” gives a total of 33 ¾” this is the distance the stairway will end away from the deck. In this example, there will be two pieces of 5 ½” decking on each tread, and the two pieces of decking will be spaced ¼” apart, which gives each tread a total depth of 11 ¼”. To determine how far away from the deck the stairway will end, the depth of the treads will need to be determined.

The decking is 5 ½” so two pieces together will be 11”.

This brings the total tread count to three. In this example, there are four rises, and there will be one less tread than rise (since one of the treads on the stairway will be the actual deck). Knowing the number of rises that are needed for the stairway will help determine the number of treads.

Trex stair railing installation instructions